Filter
Top Products
Notice:
• When using concentrated
washer fluid, follow the
manufacturer’s instructions for
adding water.
• Do not mix water with
ready-to-use washer fluid.
Water can cause the solution
to freeze and damage your
washer fluid tank and other
parts of the washer system.
Also, water does not clean as
well as washer fluid.
• Fill the washer fluid tank only
three-quarters full when it is
very cold. This allows for fluid
expansion if freezing occurs,
which could damage the tank if
it is completely full.
• Do not use engine coolant
(antifreeze) in your windshield
washer. It can damage the
vehicle’s windshield washer
system and paint.
Windshield Wiper Blade
Replacement
Windshield wiper blades should be
inspected for wear or cracking.
To replace the windshield wiper
blades:
1. Turn the wiper switch to the off
position.
2. Turn the ignition to the
LOCK/OFF position.
3. Raise the wiper arm away from
the windshield.
4. Press the two clips at either side
of the wiper blade then tilt the
wiper blade at 90° to the
wiper arm and remove.
5. Replace the wiper blade by
pressing in the clip and turning
the blade toward the arm to reset
the clip with the wiper arm.
6. Lower the wiper arm on to the
windshield.
Vehicle Service and Care 9-23
2008 - Pontiac G8 Owner Manual