Filter
Top Products
Foreign materials such as calcium
chloride and other salts, ice
melting agents, road oil and tar, tree
sap, bird droppings, chemicals
from industrial chimneys, etc., can
damage your vehicle’s finish if
they remain on painted surfaces.
Wash the vehicle as soon as
possible. If necessary, use
non-abrasive cleaners that are
marked safe for painted surfaces to
remove foreign matter.
Exterior painted surfaces are subject
to aging, weather and chemical
fallout that can take their toll over a
period of years. You can help to keep
the paint finish looking new by
keeping your vehicle garaged or
covered whenever possible.
Protecting Exterior Bright Metal
Parts
Bright metal parts should be
cleaned regularly to keep their
luster. Wash with water or
use chrome polish on chrome or
stainless steel trim, if necessary.
Use special care with aluminum trim.
To avoid damaging protective trim,
never use auto or chrome polish,
steam or caustic soap to clean
aluminum. A coating of wax, rubbed
to high polish, is recommended for all
bright metal parts.
Washing Your Vehicle
The best way to preserve your
vehicle’s finish is to keep it clean by
washing it often.
Do not wash the vehicle in direct
sunlight. Use a car washing soap.
Notice: Certain cleaners contain
chemicals that can damage the
emblems or nameplates on your
vehicle. Check the cleaning
product label. If it states that it
should not be used on plastic
parts, do not use it on your vehicle
or damage may occur and it would
not be covered by the warranty.
Do not use cleaning agents that are
petroleum based or that contain
acid or abrasives, as they can
damage the paint, metal or plastic
on your vehicle. Approved cleaning
products can be obtained from
your dealer/retailer. See Vehicle
Care/Appearance Materials on
page 9-99. Follow all manufacturers’
directions regarding correct
product usage, necessary safety
precautions and appropriate
disposal of any vehicle care product.
Vehicle Service and Care 9-95
2008 - Pontiac G8 Owner Manual