Filter
Top Products
3. Insert and turn the new
section (A) to ON/RUN within
five seconds of removing
the original key.
4. Turn the new section (A) to
LOCK/OFF. Section (A) is
now programmed.
To program a new section (B):
1. Turn the ignition to ON/RUN with
the new section (A).
The vehicle must be in
PARK (P).
2. Select Remote Key from the
personalization menu.
3. Select Program.
4. Press
Q and W on the new
section (B), at the same time,
until you hear two beeps.
5. Repeat Step 4 for all other keys,
including keys that require
programming or ones previously
programmed to the vehicle.
Any key not reprogrammed will
be erased.
6. Turn the ignition to LOCK/OFF.
7. Join sections (A) and (B)
until they click.
Do not join the two key sections
until programming is complete.
Do not leave the key or device that
disarms or deactivates the theft
deterrent system in the vehicle.
Content Theft-Deterrent
Your vehicle has a content
theft-deterrent alarm system.
Arming the System
To arm the system, either:
• Press Q on the RKE transmitter.
• Or, lock the vehicle using the
key in the driver’s door.
The alarm will automatically arm
after about 30 seconds. The security
light, located on the instrument
panel, will flash.
Press
V on the RKE transmitter
to open the trunk without setting
off the alarm. The system will rearm
when the trunk is closed.
Disarming the System
To disarm the system, do one of the
following:
• Press K on the RKE transmitter.
• Turn the ignition to ON/RUN.
• Allow the alarm to time out after
about 30 seconds and reset
itself.
The alarm will automatically disarm.
If the system is armed and any
door is unlocked without pressing
K
on the RKE transmitter the alarm
will sound.
Keys, Doors and Windows 2-13
2008 - Pontiac G8 Owner Manual