Filter
Top Products
4. Turn the cap counterclockwise
and pull it straight up.
5. When the engine is hot, the level
should be at the hot MAX level.
When the engine is cold, the
fluid level should be between
MIN and MAX on the dipstick.
6. Replace the cap.
Adding Power Steering Fluid
To determine what kind of fluid
to use, see Recommended Fluids
and Lubricants on page 11-12.
Always use the proper fluid. Failure
to use the proper fluid can cause
leaks and damage hoses and seals.
1. Turn the ignition to LOCK/OFF.
2. Top off with power steering
fluid. Do not overfill the reservoir.
3. Push the cap straight down
and turn clockwise to tighten.
Windshield Washer Fluid
What to Use
When you need windshield washer
fluid, be sure to read the
manufacturer’s instructions before
use. If you will be operating
your vehicle in an area where the
temperature may fall below freezing,
use a fluid that has sufficient
protection against freezing.
Adding Washer Fluid
Open the cap with the washer
symbol on it. Add washer fluid
until the tank is full. See Engine
Compartment Overview on page 9-6
for reservoir location.
V8 Engine
9-22 Vehicle Service and Care
2008 - Pontiac G8 Owner Manual