Filter
Top Products
Notice: In cold weather, water
can freeze and crack the engine,
radiator, heater core and other
parts. Use the recommended
coolant and the proper coolant
mixture.
{ CAUTION
You can be burned if you spill
coolant on hot engine parts.
Coolant contains ethylene
glycol and it will burn if the
engine parts are hot enough.
Do not spill coolant on a hot
engine.
1. Check the engine coolant
reservoir (A) level and, if
required, top with coolant. See
Engine Coolant on page 9-13.
2. Locate the radiator pressure
cap (B).
{ CAUTION
Steam and scalding liquids
from a hot cooling system can
blow out and burn you badly.
They are under pressure, and if
you turn the radiator pressure
cap — even a little — they can
(Continued)
CAUTION (Continued)
come out at high speed. Never
turn the cap when the cooling
system, including the radiator
pressure cap, is hot. Wait for
the cooling system and radiator
pressure cap to cool if you ever
have to turn the pressure cap.
3. Cover the cap with a thick
cloth and turn it slowly
counterclockwise and remove.
4. If there is no coolant or the level
is low, slowly fill the system
through the radiator pressure cap
opening with a 50/50 mixture
of clean, drinkable water and
a DEX-COOL
®
coolant until full.
Wait 30 seconds for coolant
to settle and top off if the
level drops.
Do not spill coolant on the
accessory drive belts.
If a spill occurs, rinse the belt
with fresh water.
9-20 Vehicle Service and Care
2008 - Pontiac G8 Owner Manual