Filter
Top Products
18
Cloth backed abrasives may also be cleaned by
soaking in paint thinner or mineral spirits for 20
minutes to 1 hour, then using a brush to remove
any build-up or burns. Dry the abrasive strips
completely before reuse.
Extending Abrasive Life. Abrasive life can also
be increased by removing the abrasive strip
from the drum and reversing it. To do this,
remove the strip and use what was the trailing
end as the starting end on the right side of the
drum. Reversing the strip will provide a fresh set
of cutting edges on the abrasive.
Switch Lock
To safeguard your machine from unauthorized operation and to avoid accidental starting by young
children, the use of a padlock (not provided) is highly recommended.
Figure 26
To lock out an on/off switch (Figure 26):
1. Open the padlock.
2. Insert through holes in the start button.
3. Close the padlock.
4. Store padlock key in a safe place.