Filter
Top Products
The information provided in this documentation contains general
descriptions and/or technical characteristics of the performance of the
products contained herein. This documentation is not intended as a
substitute for and is not to be used for determining suitability or relia-
bility of these products for specific user applications. It is the duty of
any such user or integrator to perform the appropriate and complete
risk analysis, evaluation and testing of the products with respect to the
relevant specific application or use thereof. Neither Schneider Electric
nor any of its affiliates or subsidiaries shall be responsible or liable for
misuse of the information contained herein. If you have any sugges-
tions for improvements or amendments or have found errors in this
publication, please notify us.
No part of this document may be reproduced in any form or by any
means, electronic or mechanical, including photocopying, without
express written permission of Schneider Electric.
All pertinent state, regional, and local safety regulations must be
observed when installing and using this product. For reasons of safety
and to help ensure compliance with documented system data, only
the manufacturer should perform repairs to components.
When devices are used for applications with technical safety require-
ments, the relevant instructions must be followed.
Failure to use Schneider Electric software or approved software with
our hardware products may result in injury, harm, or improper operat-
ing results.
Failure to observe this information can result in injury or equipment
damage.
© 2013 Schneider Electric. All rights reserved.
LXM32
2 Common DC bus
MNA01M001EN, V1.01, 08.2014