Filter
Top Products
The following instructions apply to drives with screw terminals for the
DC bus.
3
A
B
1
2
C
LXM32∙... D85, C10
A mm (in) 220 (8.66)
B mm (in) 50 (1.97)
C mm (in) 18 (0.71)
(1) Strip the cable jacket, length A.
(2) Slide the shield braiding back over the cable jacket.
(3) Secure the shield braiding with a heat shrink tube. The
shield must have at least length D. Verify that a large surface
area of the shield braiding is connected to the EMC shield
clamp.
4 Installation
LXM32
44
Common DC bus
MNA01M001EN, V1.01, 08.2014