Filter
Top Products
PC/-PA/+
Figure 16: Unlocking the DC bus connector, step 1: Push cables towards con-
nector.
PC/-PA/+
Figure 17: Unlocking the DC bus connector, step 2: Push cables towards con-
nector, at the same time remove the connector with the other hand.
If the two wires cannot move freely, the DC bus connector will not
unlock.
▶
Push the two wires towards the connector (see Figure 16).
▶
While pushing the wires towards the connector, pull the connector
at the connector housing with the other hand.The connector is
unlocked and you can remove the DC bus connection cable (see ).
The connector is unlocked and you can remove the DC bus con-
nection cable (see Figure 17).
4 Installation
LXM32
46
Common DC bus
MNA01M001EN, V1.01, 08.2014