Filter
Top Products
5.1 Commissioning procedure
5.1.1 DC bus connection LXM32 to LXM32
Commissioning steps:
▶
Verify proper installation of the drives and the connections for the
common DC bus, see chapter "4.3 Verifying installation", page 49.
▶
Switch on the controller supply for all devices.
▶
Set the parameters for the braking resistors, see chapter
"5.2 LXM32: Setting the braking resistor parameters".
▶
Commission the drives, see the descriptions in the manuals for the
individual products.
5 Commissioning
LXM32
52
Common DC bus
MNA01M001EN, V1.01, 08.2014