Schneider Electric MNA01M001EN Welding System User Manual


 
3 Engineering
This chapter provides engineering information for a common DC bus
for several drives.
Incorrect use of the DC bus may permanently damage the drives
either immediately or over time.
WARNING
DESTRUCTION OF SYSTEM COMPONENTS AND LOSS OF CONTROL
Verify that all requirements for using the DC bus are met.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
WARNING
DESTRUCTION OF SYSTEM COMPONENTS
Connect only drives with identical nominal voltages.
Connect single-phase drives only to single-phase drives. Connect
single-phase drives to the same phase.
Connect three-phase drives only to three-phase drives.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
LXM32: See the Engineering chapter in the LXM32 product manual
for vital engineering information concerning the LXM32 drive.
LXM32
3 Engineering
Common DC bus
21
MNA01M001EN, V1.01, 08.2014