Filter
Top Products
4.3 Verifying installation
▶
Verify that the wiring complies with the specifications as per chap-
ter "3 EngineeringInstallation".
▶
Verify that the fuses used do not exceed the maximum permissible
fuse rating.
▶
Verify that PA/+ is only connected to PA/+ and that PC/- is only
connected to PC/-.
▶
Verify that the shield is connected to a large surface area if you use
shielded DC bus cables.
▶
Verify that the connector locks are properly snapped in.
LXM32
4 Installation
Common DC bus
49
MNA01M001EN, V1.01, 08.2014