Shindaiwa DGW400DM-380A Welder User Manual


 
Selecting proper engine oil
<Caution>
Use the API class CC or higher.
Viscosity and Temperature
Temperature Over +20 +10 +20 -10 +40
Viscosity SAE30 SAE20 SAE10W/30
6-2 Checking Coolant / Water
Danger : Injuries
z Close all doors and place locks during operating this equipment, to avoid
injuries by unintentionally touching cooling fan and fan belt.
Danger : Burns
z Do not open the radiator cap while operating this equipment or immediately
after stopping the equipment, to avoid sustaining burns from hot vapor.
Caution : Burns
z Do not touch the engine and muffler during operation and immediately after
stopping the equipment, for the temperature can reach extremely high.
Check to see if the coolant/water level is between FULL and LOW levels in the sub
tank. If the coolant/water is below the LOW level, fill the tank and the radiator
accordingly.
- 15 -