Filter
Top Products
(1) Oil Change
First Time 50 hour mark
2
nd
or after Every 100 hours
1 Remove the oil plug.
2 Loosen the oil drain plug and allow the oil to drain fully.
3 Reinstall the oil drain plug.
4 Checking the oil level by the oil level gauge, add oil into the oil filler to fill up to
the max level (about 5.0 liter).
5 Reinstall the oil plug hand tight.
<Caution>
z Refer to 6-1 Checking Engine Oil to select engine oil.
z Change the packing, whenever changing oil.
z Packing No. : 6C090-58961 (Kubota)
(2) Oil Filter Change
First Time 50 hour mark
2
nd
or after Every 200 hours
Drain the engine oil completely, as described in 11-1 Oil Change .
Loosen and remove the oil filter, using an oil filter wrench.
Smear a little engine oil on the rubber gasket of a new filter.
Screw the new filter into place and tighten it by hand until the gasket contact the
seat. Then, give it additional 1.1/4 Turn to seat the filter, using an filter wrench.
Supply oil and install the filler cap.
<Caution>
z If an oil filter wrench is not available, contact our authorized distributor or our
engineering section.
z Oil Filter Part No.: 16271-32092 (Kubota)
(3) Clean/Change Air Filter Element
- 30 -