Filter
Top Products
Caution : Fire
z The equipment uses Diesel Oil as a fuel. When refueling, always stop the
engine and keep away from fire. Moreover, always wait until the engine cools
down before refueling.
z Always wipe any drip of Diesel fuel or lubrication oil. Do not use this equipment
when a leak is found. Repair the equipment before use.
z Temperature around muffler and exhaust can get extremely high. Keep any
inflammable items (such as fuel, gas, paint, etc.) away from the equipment.
z Keep any inflammable items and easily burning items away from the place in
welding, because welding splashes spatters.
z Always operate this equipment on flat surface and, at least 1 meter away from
any objects (wall, box, etc.).
z Do not connect AC output to any indoor wiring.
z Always wait until the equipment cools down, before placing any covering
materials for storage.
Caution : Burns
z Do not touch the engine and muffler during operation and immediately after
stopping the equipment, for the temperature can reach extremely high.
z When checking engine oil or changing oil, always stop the engine, and wait until
the engine cools down. If you open either the oil gauge or the oil plug during
operation, hot oil may cause some injury.
z Be sure to wear leather gloves, apron, shoe covers, eye protection glass(es)
(mask), safety shoes, safety cap, and long sleeve shirts, because welding
splashes spatters.
Caution : Injuries
z When lifting the equipment, always use a lift hook. Do not lift a handle, for it
may cause equipment to drop due to handle breaking off.
z Always place the equipment on a flat and stable surface, to keep the
equipment from sliding. Be sure to lock the wheels for the wheeled models.
z When starting the engine, turn off the connected equipment and set the circuit
breaker to OFF position.
z Do not move the equipment during operation.
z When performing equipment check and maintenance, always stop the engine.
z Do not operate the equipment, if the equipment is being modified or if the parts
are removed.
- 3 -