Filter
Top Products
12. Long-Term Storage
Danger : Electric Shock
z Before performing any equipment check or maintenance, stop the engine, and
remove the engine key. A person performing the maintenance should always
keep the key.
Caution : Injuries
z Before performing any equipment check or maintenance, stop the engine, and
remove the engine key. A person performing the maintenance should always
keep the key.
Caution : Fire Burns
z When checking engine, always stop the engine, and keep far away from fire.
z Temperature around muffler and exhaust can get extremely high. Wait until the
engine cools down, before performing any checks.
If the generator/welder will not be used for more than two months, perform the following
maintenance and storage procedures.
Remove the battery.
Change the engine oil.
Drain fuel from the fuel tank and the fuel strainer.
Clean all parts, cover the generator/welder, and keep it in the storage, away from
dust and humidity.
<Caution>
z Recharge the removed battery once a month.
13. Troubleshooting
Danger : Electric Shock
z Do not operate the equipment, if the equipment or you are wet.
z Before performing any equipment check or maintenance, stop the engine.
Caution : Injuries
z When performing equipment check and maintenance, always stop the engine.
Caution : Fire Burns
z When checking engine, always stop the engine, and keep away from fire.
z Temperature around engine, muffler and exhaust can get extremely high. Wait
until the engine cools down, before performing any checks.
Follow the guideline below, when performing any troubleshooting. If you cannot resolve
the problems by this troubleshooting guide, contact the authorized distributor or our
engineering section to request the repair.
- 33 -