Shindaiwa DGW400DM-380A Welder User Manual


 
Clean 1
st
50 hours and Every 100 hours afterwards
Replace Every 400 hours
Loosen the wing bolts in the air cleaner and remove the air element.
Clean or replace the air element.
<The element is adhered with dried contaminants>
Blow up compressed air from inside the element.
<The element is adhered with carbon or oil>
Replace to a new one.
Reinstall it in reverse order.
<Caution>
z Clean more frequently, if it is used in dusty environment.
z Element Part No. 15471-11083 (Kubota)
(4) Clean/Change Fuel Strainer
Clean 1
st
50 hours and Every 100 hours afterwards
Replace Every 400 hours
Turn the fuel lever to CLOSE .
Unscrew the retainer ring counterclockwise, and remove the cup and the filter
element.
Discard any dust or water inside the cup, and clean the filter element by blowing
compressed air, or replace if necessary.
Reassemble it back.
<Caution>
z Be sure to check for any contaminants on the packing, whenever reinstalling
the cup.
z Turn the fuel line valve lever OPEN after assembling, and check for any leak.
Having confirmed no leak without fail, turn the fuel line valve CLOSE .
z Element Part No.: 15521-43161 (Kubota)
(5) Drain Water from Fuel Tank
- 31 -