Filter
Top Products
For Machines Mfg. Since 5/11 13" x 40" Heavy 13
®
EVS Lathe
-59-
ACCESSORIES
Accessories
This section includes the most common
accessories available for your lathe, which may
be available through your local South Bend
Lathe Co. dealer. If you do not have a dealer in
your area, please call us at (360) 734-1540 or
email us at cs@southbendlathe.com.
SB1279—10 Pc. Precision 5–C Collet Set
Set of 10 collets sized from
1
⁄8" -
3
⁄4". Same quality
as the individual collets, only packaged in one
convenient set.
Figure 86. Model SB1279 10 Pc. 5-C Collet Set.
SB1264—Collect Attachment
This collet attachment takes advantage of the
South Bend factory-made collet port in the lathe
gear cover. It installs easily without requiring
modification to the gear cover. Capable of
delivering years of trouble-free service and
manufactured with the same high-quality
workmanship, materials, and tolerances South
Bend machinery is known for.
Figure 87. Model SB1264 Collect Attachment.
SB1263—Taper Attachment
This taper attachment mounts to the back of the
lathe bedway and allows you to make accurate
tapers of up to 12" without having to offset
the tailstock or disengage the cross slide nut.
Features scales at both ends that read in inches-
per-foot and degrees. An angle adjusting knob
with fine threads provides exacting control when
setting tapers.
Figure 89. Model SB1263 Taper Attachment.
D1-5 Back Plates
SB1397—6
1
⁄4"
SB1399—8
1
⁄4"
SB1401—10
1
⁄2"
Sized to fit D1-5 spindles, these back plates are
precision made and mount to your plain-back
chuck with minimal modifications.
Figure 88. D1-5 Back Plate.