Filter
Top Products
For Machines Mfg. Since 5/11 13" x 40" Heavy 13
®
EVS Lathe
-7-
INTRODUCTION
Tailstock
W. Quill: Moves toward and away from the
spindle and holds centers and tooling.
X. Quill Lock Lever: Secures the quill in
position.
Y. Tailstock Lock Lever: Secures the tailstock in
position along the bedway.
Z. Quill Handwheel: Moves the quill toward or
away from the spindle.
AA. Gib Adjustment Screw: Adjusts the tapered
gib to control tailstock offset accuracy
(1 of 2).
AB. Tailstock Offset Screw: Adjusts the tailstock
offset left or right from the spindle centerline
(1 of 2).
Safety Brake Pedal
This lathe is equipped with a brake pedal (see
Figure 7) to quickly stop the spindle instead of
allowing it to coast to a stop on its own. Pushing
the foot brake while the spindle is ON cuts power
to the motor and stops the spindle.
After the foot brake is used, the spindle lever
must be returned to the OFF (middle) position
to reset the spindle switches before re-starting
spindle rotation.
Figure 7. Foot brake and spindle lever.
Foot Brake
Spindle
Lever
Figure 6. Tailstock controls.
W
X
Y
Z
AA
AB