Filter
Top Products
Command Descriptions
2–230
TDS Family Oscilloscope Programmer Manual
MEASUrement:MEAS<x>:UNITS? (Query Only)
Returns the units for the measurement specified by MEASUre-
ment:MEAS<x>:TYPe.
Measurement
MEASUrement:MEAS<x>:UNITS?
MEAS
::MEASUrement
UNITS
<x>
?
<QString> returns "V" for volts, "s" for seconds, "HZ" for hertz, "VV" for
volts
2
, or "%" for percent.
On the TDS 400A, <QString> also returns "c" for clocks, "Vc" for volt-clocks,
or "/c" for 1/clks.
MEASUREMENT:MEAS3:UNITS?
might return "%", indicating the units for Measurement 3 are percent.
MEASUrement:MEAS<x>:VALue? (Query Only)
Returns the value that has been calculated for the measurement specified by <x>.
NOTE. This value is a display value and will be updated perhaps every 1/3
second. If you are acquiring a long acquisition record, the TDS may take longer
than this time to update.
Measurement
MEASUrement:MEAS<x>:VALue?
MEASUrement :
MEAS
?
<x>
:
VALue
<NR3>
Group
Syntax
Returns
Examples
Group
Syntax
Returns