Filter
Top Products
Status and Events
TDS Family Oscilloscope Programmer Manual
3–17
Table 3–5: Execution Error Messages – EXE Bit 4 (Cont.)
Code Message
2301 Cursor error, Off-screen
2302 Cursor error, cursors in different frames
2311 Group requested has not been selected or has been deleted
Table 3–6 lists the device errors that can occur during digitizing oscilloscope
operation. These errors may indicate that the oscilloscope needs repair.
Table 3–6: Device Error Messages – DDE Bit 3
Code Message
300 Device-specific error
310 System error
311 Memory error
312 PUD memory lost
313 Calibration memory lost
314 Save/recall memory lost
315 Configuration memory lost
350 Queue overflow (does not set DDE bit)
Table 3–7 lists the system event messages. These messages are generated
whenever certain system conditions occur.
Table 3–7: System Event Messages
Code Message
400 Query event
401 Power on (PON bit 7 set)
402 Operation complete (OPC bit 0 set)
403 User request (URQ bit 6 set)
404 Power fail (DDE bit 3 set)
405 Request control
410 Query INTERRUPTED (QYE bit 2 set)
420 Query UNTERMINATED (QYE bit 2 set)
430 Query DEADLOCKED (QYE bit 2 set)