Filter
Top Products
Command Descriptions
TDS Family Oscilloscope Programmer Manual
2–337
SECAm specifies mode for SECAM signals.
TRIGGER:MAIN:VIDEO:PAL MONO
specifies non-color PAL signals.
TRIGger:MAIn:VIDeo:SCAN
TDS 400A Option 05 Only
Sets or queries the video trigger scan parameters. This is equivalent to using the
Video Scan Parameters side menu.
Trigger
TRIGger:MAIn:VIDeo:SCAN { RATE1 | RATE2 | RATE3 | RATE4 }
TRIGger:MAIn:VIDeo:SCAN?
TRIGger :
:
VIDeo
MAIn
SCAN
:
<Space>
RATE2
?
RATE4
RATE3
RATE1
RATE1 specifies a 15 to 20 kHz video line rate.
RATE2 specifies a 20 to 25 kHz video line rate.
RATE3 specifies a 25 to 35 kHz video line rate.
RATE4 specifies a 35 to 64 kHz video line rate.
TRIGGER:MAIN:VIDEO:SCAN RATE1
selects rate 1.
TRIGger:MAIn:VIDeo:SCANPeriod
TDS 400A Option 05 Only
Sets or queries the video trigger scan period.
Examples
Group
Syntax
Arguments
Examples