Tektronix THS710A Work Light User Manual


 
Maintenance
THS710A, THS720A, THS730A & THS720P Service Manual
6–7
You will need the following tools to remove and replace all the modules in the
TekScope instrument.
H Torque-limiting screwdriver, 12 in lb (1.3 N m) range with Torx T-15 tip
H Screwdriver with
1
@
4
inch flat blade
H Screwdriver with
1
@
8
inch flat blade
H Needle-nose pliers
H Sharp knife (X-ACTO knife or equivalent)
Tools Required