Filter
Top Products
Maintenance
THS710A, THS720A, THS730A & THS720P Service Manual
6–9
Installation. Use this procedure to install a new tilt stand.
1. Orient the tilt stand to the back of the instrument case with the hinge pins
toward the top and the side bump toward the handle.
2. Insert one hinge pin into its socket and place the other into the cavity in the
back of the instrument case as shown in Figure 6–2.
3. Rotate the tilt stand to slide the second hinge pin upward and into its socket.
Insert hinge pin into the socket.
1
Rotate the tilt stand to slide the
second hinge pin into its socket.
2
Figure 6–2: Installing the tilt stand