Filter
Top Products
GE864 Hardware User Guide
1vv0300694 Rev.10 - 10/06/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 60 of 69
12.1.3 Suggested Inhibit Area
In order to easily rework the GE864 is suggested to consider on the application a 1.5mm Inhibit area
around the module:
Top View
It is also suggested, as common rule for an SMT component, to avoid having a mechanical part of the
application in direct contact with the module.
1.5mm
1.5mm