Filter
Top Products
Workman 200 Ultra Sonic Boom System (Rev. C)Page 3.2 -- 7
Sprayer Operation on Level Turf
During sprayer operation with the sonic boom switch in
the automatic position (sonic boom light is illuminated),
the boom mounted sonic boom sensors continually
send impulse signals and then receive echoes as the
signalsbounceoff theturf. The Toroelectroniccontroller
(TEC) determines the sensor distance from the ground
based on the elapsed time between the sensor signal
generationandthe receivedecho.As longas thesensor
height remains the same as the calibrated height, the
spray boom willremain at a fixed height from the ground
for spraying accuracy.
NOTE: Duringnormal Ultra Sonic Boom system opera-
tion, there may be some slight movement of the booms.
On level turf, the boom sensors continually send signals
and receive echoes that determine that the boom sec-
tions are at the calibrated height. Thus, there is no need
to change boom height and the boom sections will re-
main at the correct, level position.
Figure 3
LEVEL GROUND
CONSISTENT BOOM HEIGHT
SO BOOM ACTUATOR MOVEMENT
IS NOT NECESSARY
Ultra Sonic
Boom System