Filter
Top Products
Disassembly (Fig. 17)
IMPORTANT: Make sure to remove and neutralize
chemicals from tank and other components before
disassembly. Wear protective clothing, chemical re
-
sistant gloves, and eye protection during repair.
1. Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
2. Drain spray tank (see Operator’s Manual).
3. Label hoses for proper installation after repairs are
completed.
4. Remove agitation nozzles as required using Figure
17 as a guide. Discard all removed o–rings and gaskets.
Assembly (Fig. 17)
NOTE: Coat all o–rings with vegetable oil before instal-
lation to reduce the chance of damage during assembly.
1. Install agitation nozzles using Figure 17 as a guide.
Replace all removed o–rings and gaskets.
2. Check spray system for leaks.
Workman 200 Spray System
Page 3 – 19
Spray System
Spray
System