Filter
Top Products
Disassembly (Fig. 33)
IMPORTANT: Make sure to remove and neutralize
chemicals from tank and spray components before
disassembly. Wear protective clothing, chemical re
-
sistant gloves, and eye protection during repair.
1. Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
2. Drain spray tank (see Operator’s Manual).
3. Disassemble boom bypass using Figures 33 and 34
as guides. Discard all removed o–rings and gaskets.
1
2
Assembly (Fig. 33)
Figure 34
NOTE: Coat all o–rings with vegetable oil before instal-
1. Boom bypass elbow 2. Tank suction tube
lation to reduce the chance of damage during assembly.
1. Assemble boom bypass using Figures 33 and 34as
guides. Replace all removed o–rings and gaskets.
2. Check spray tank for leaks.
Spray
System
Workman 200 Spray System
Page 3 – 33
Spray System