Wagner SprayTech 2309 518 Paint Sprayer User Manual


  Open as PDF
of 32
 
46
Plast Coat 430
GB
AUTOMATIC SPRAY LANCE PNEUMATIC SPRAY LANCE
A
F R
POWER
ERROR
1
2
3
4
5
6.8 BEGINNING OF THE SPRAYING PROCESS
• Opentheairtap(Fig. 16, 2) and material tap (Fig. 16, 1) at the
spraylance.
• Set the amount of material using the volume regulator and
theamountofairbysettingtheairtap(Fig. 16, 2) in order to
achieve the correspondingspraypattern.
Increased material tap wear. Do not use the
material tap to set the material volume.
The delivery volume controller should be
used for this purpose.
6.9 END OF THE SPRAYING PROCESS
• Closethematerialtap(Fig. 16, 3).
• Closetheairtap(Fig. 16, 2).
Always close material tap at end of the
spray process.
3 2
1
1
6.8 BEGINNING OF THE SPRAYING PROCESS
• Openmaterialtap(1,Fig.17)onspraylance.
• Set the amount of material using the volume regulator (g.
15, 5) in order to achieve the correspondingspraypattern.
Increased material tap wear. Do not use the
material tap to set the material volume.
The delivery volume controller should be
used for this purpose.
6.9 END OF THE SPRAYING PROCESS
• Closematerialtap(1,Fig.17)onspraylance.
Always close material tap at end of the
spray process.
commIssIonIng
 previous next