Wagner SprayTech 2309 518 Paint Sprayer User Manual


  Open as PDF
of 32
 
34
Plast Coat 430
GB
1 SAFETY REGULATIONS
The following sources are just a sample of those containing
safetyrequirementsformortarconveyors:
a) Working reliability regulation, accident prevention
regulation "Fundamental principles of prevention"
(BetrbSichV, BGV A1) including explanations and details
of BGR A1 (Occupational Safety Regulations)
b) BG 183, Occupational Safety Regulation of the Beruf-
genossenschaft der Bauwirtschaft (The statutory acci-
dent and insurance prevention institution in the build-
ing trade in Germany), mortar conveyors and mortar
spraying machines
c) DIN EN 12001: 2004-05, Conveying, spraying and
placing machines for concrete and mortar - Safety
requirements; German version; German version EN
12001:2003
The following specications are to be observed in particular to
handlemortarsprayingmachinessafely:
Usage of the mortar spraying machine
ThemortarsprayingmachinePlastCoat430mayonlybeused
to process the coating materials described on page 36. Any
other usage is not allowed.
Proper usage also includes the observance of the operating
manual and the observance of the inspection and mainte-
nanceconditions.Alwayskeeptheoperatingmanualonhand
atthepointofuseofthemortarsprayingmachine.
ThemortarsprayingmachinePlastCoat430mayonlybeoper-
atedwithamanometer.Onlythemortarhosespeciedbythe
manufacturermaybeused.
Useonlymarkedmortarhoseswithatleast40barsoperating
pressure.
Protection of persons
Inordertoprotecteyes,skinandtherespiratoryorgans:Wear
safety goggles, protective clothing, gloves, possibly use
protective skin cream and respiratory equipment. Do
not decouple the mortar hose as long as it is under pressure.
Watchthemanometer!Wearsafetygoggles!Donotpointthe
spraylanceatpersons!
Inordertoprotectyourearswear ear protection.
Wearsafetyshoeswhentransportingthemachineorworking
with it.
People not needed to assist with machine installation, assem-
blyoroperation,mustkeepawayfromthemachine.
The PC 430 is equipped with an EMERGENCY STOP switch for
emergencies.
Breathing masks
Make a breathing mask available to the processor in order to
protect against mineral dust. Refer to the regulations of the
German employer's liability insurance association ("Beruf-
sgenossenschaft") "Rules for the use of breathing masks"
(BGR190)and"Processingcoatingmaterials"(BGVD25).
Connection to the mains network only via a special feed-
ing point, for example via a distribution board for con-
struction sites, with residual current protective device
with INF ≤ 30 mA.
Avoid soiling of the socket for the remote control at the
control unit.
Risk of injury from escaping material.
Before switching on, always check that the
material tap on the spray lance is closed.
Close material tap whenever stopping
work.
Risk of crushing when adjusting height of
holder and connecting material hose.
Never operate mortar spraying machine
with an exposed rotor.
Do not reach into the rotor when it is mov-
ing. Risk of crushing.
Caution if you have long hair. Only wear
close-tting clothes at work.
Cleaning and maintenance
Never decouple mortar hose or disassemble machine when
under pressure. Note pressure reading on pressure gauge.
Whenperformingmaintenancework,alwaysswitchomor-
tar spraying machine, disconnect mains plug and ensure it
cannotbepluggedbackinbymistake.
Donotspraydownthemotorandcontrolunitofthemortar
sprayingmachinewith awater-jet,high-pressurecleaneror
high-pressure steam cleaner. Danger of short-circuits caused
bywateringressing.
Electrical equipment
Workonthemachine’selectrical equipmentmaybe carried
outonlybyaqualiedelectrician.Theelectricalequipmentis
tobecheckedregularly.Eliminatefaultssuchaslooseconnec-
tions or scorched cables.
Keep the label on the mortar spraying machine clean and
legible.
Whenever the machine is automatically
brought to a standstill or during power
failure, immediately move the selec-
tor switch to “A” to prevent the machine
starting back up again unintentionally.
There is a danger of injury.
safety regulatIons
 previous next