Wagner SprayTech 2309 518 Paint Sprayer User Manual


  Open as PDF
of 32
 
36
Plast Coat 430
GB
2.1 FUNCTION OF THE MORTAR SPRAYING MACHINE
PLASTCOAT 430
The coating material is fed through the suction eect of the
screw pump. The suction eect causes the coating material
to enter the eccentric screw pump. This pump builds up the
pressure required for transportation through the mortar hose.
The compressed air required for atomisation is supplied at the
spraylance.Themortarsprayingmachinecanbeswitchedon
and o using the electric control. This can also be used to con-
trolthedeliveryvolume.
Asoftevenspraypatterncanbeachievedbymeansofthe
smoothlyregulatedconveycapacityofthecoatingmaterial.
2.2 PROCESSIBLE COATING MATERIALS
• Thermalinsulationcompositesystembondingagent
(mineralandarticialresinsystems)
• Articialresinplastersupto3mmgranularsize
• Silicateplastersupto3mmgranularsize
• Siliconeresinplastersupto3mmgranularsize
• Mineralnalcoatsupto3mmgranularsize
• Lightweightplastersystemsupto3mmgranularsize
• Scrapedstuccoupto3mmgranularsize
• Thermalinsulationplasters
• Restorationplaster
• Porousconcretecoating
• Quartzplastic
• Roofcoatings
• Fireprotectioncoatings
• Mineralsealingsludges
• Bitumenemulsions
• Armoringller
• Liquidwood-chipwallpaper
• Casementgroutingmortar
• Articialresinrenderingbase
• Washprimer
• Fillingpaint,alsobrous
• Elasticcoating
• Acousticplaster,articialresinbonded
• Fillers,articialresinbonded
All the coating materials must be suitable for machine process-
ing. Refer to the product data sheet of the coating material to
be processed.
Use other coating materials only after agreement with the
manufacturerortheWAGNERapplicationtechnologyservice.
3 TECHNICAL DATA
PlastCoat 430
Voltage: 230 V~, 50 Hz
Fusing: 16 A time-lag
Devicesupplycable: 5 m long, 3 x 1.5 mm
2
Motor output P
1
: 1.8 kW
Max.conveycapacity(water): 12 l/min
Max. operating pressure: 40 bar
Max. granular size: K3 mm
Dimensions L x W x H: 700 x 600 x 1050 mm
Weight: 38 kg
Max.tyrepressure: 2.5 bar
Degree of protection: IP 55
Max. sound pressure level: 70 dB (A)*
Atomizing air connection: Rapid action coupling
DN 7.2 mm
Max. atomizing air pressure: 10 bar
Minimum required compressed
air volume:
280 l/min
Max. mortar hose length: 30 m (and 2.5 m hose
whip)
Max.deliveryheight: 20 m
* Place of measurement: 1 m distance from unit and 1.60 m
above reverberant oor.
2 INTRODUCTION TO WORKING WITH
THE MORTAR SPRAYING MACHINE
PLASTCOAT 430
The suction pump PlastCoat 430 is conceived for using and
processing ready mixed mineral coating materials from a
bucket.
Thematerialsupplyisensuredbytheimmersionofthesuc-
tion tube into the material bucket.
The machine is not designed for use as a cleaning device.
IntroDuctIon
 previous next