Filter
Top Products
Prestige 630-C Series ADSL USB Modem
6-4 Basic Configuration
Table 6-1 WAN Configuration
LABEL DESCRIPTION
Disconnect Timeout Enter a time in seconds after which the PPP connection will disconnect if the line
is idle (max: 32767 seconds).
Authentication This field sets the authentication protocol used for outgoing calls. Options for this
field are:
Auto – Your Prestige will accept either CHAP or PAP when requested by this
remote node. PAP mode will run first, and then CHAP.
CHAP – accept CHAP only.
PAP – accept PAP only.
Automatic Reconnect Select this check box to maintain PPP connection. If the ISP shuts down the
PPP connection, it will automatically reconnect PPP session.
DHCP
DHCP Client Enable
Select Enabled or Disabled to change the status of the DHCP client.
Host Name If your ISP provided a host name, enter it here.
Submit Click this button to submit the changes.
Reset Click this button to reset all values to their defaults.
Table 6-2 WAN Configuration Options
LABEL
Bridge Mode Router Mode
(PPPoA/PPPoE)
Router Mode
(Dynamic IP)
Router Mode
(Static IP)
IP address
N/A Automatically
assigned by ISP
Automatically
assigned by ISP
Provided by ISP
Subnet Mask
N/A Automatically
assigned by ISP
Automatically
assigned by ISP
Provided by ISP