Filter
Top Products
Prestige 630-C Series ADSL USB Modem
6-8 Basic Configuration
The following table describes the fields in this screen.
Table 6-4 DNS Configuration
LABEL DESCRIPTION
DNS Proxy Selection Select a DNS proxy selection from the options below:
Disable DNS Proxy: If the DNS proxy is disabled, the LAN port does not
process DNS query messages. For the DHCP requests from local machines, the
DHCP server will select either the server configured in the Preferred DNS
Server field or the server configured in the Alternate DNS Server field (see
below).
Use Auto Discovered DNS Servers Only: If this selection is made, the DNS
proxy will store the DNS server IP addresses obtained from PPP and all DNS
query messages will be sent to one of these dynamically obtained DNS server
information.
Use User Configured DNS Servers Only: The DHCP server will select either
the server configured in the Preferred DNS Server field or the server configured
in the Alternate DNS Server field (see below).
Auto Discovery + User Configured: The DNS proxy’s table will store all the IP
addresses of dynamically obtained and user configured DNS servers.
User Configuration
Preferred DNS Server Enter the IP address in dotted decimal notation of a preferred DNS server.
Alternate DNS Server Inter the IP address in dotted decimal notation of a backup or alternate DNS
server.
Submit Click this button to apply the changes.
Reset Click this button to reset all values to their defaults.
6.5 Saving New Settings
You may click the Save Settings link in the navigation panel at any time to save you settings and allow your
Prestige to reboot. Click the Submit button as shown.
Figure 6-4 Save Settings