Filter
Top Products
Prestige 650 ADSL Router
Internet Access 3-13
DHCP client on the WAN port and so the IP Address and ENET ENCAP Gateway fields are not applicable
(N/A) as they are assigned to the Prestige by the DHCP server.
3.13 Internet Access Configuration
Menu 4 allows you to enter the Internet Access information in one screen. Menu 4 is actually a simplified
setup for one of the remote nodes that you can access in menu 11. Before you configure your Prestige for
Internet access, you need to collect your Internet account information from your ISP and telephone
company.
Use the following table to record your Internet Account Information. Note that if you are using PPP or
PPPoE encapsulation, then the only ISP information you need is a login name and password. You only need
to know the Ethernet Encapsulation Gateway IP address if you are using ENET ENCAP encapsulation.
Table 3-4 Internet Account Information
FIELD DESCRIPTION YOUR INFO
System Name Name of the Prestige (optional).
Encapsulation PPPoE, RFC1483, PPP or ENET ENCAP.
Multiplexing
LLC-based or VC-based. If this information is not
given, use the default.
VPI Enter your Virtual Path Identifier here.
VCI Enter your Virtual Channel Identifier here.
My Login Enter the login name assigned by your ISP (for
PPP/PPPoE only).
My Password Enter the password associated with your ISP assigned
My Login (for PPP/PPPoE only).
Idle Timeout
(PPPoE or PPP)
Enter the time lapse, in seconds, before you
automatically disconnect from the PPPoE or PPP
server.
IP Address Enter if your IP address if it is not dynamically
assigned.
Network Address
Translation
Full Feature, SUA Only or None.
ENET ENCAP
Gateway
IP Address
Gateway IP Address
Enter when using ENET ENCAP Encapsulation.