Filter
Top Products
Prestige 650 ADSL Router
Internet Access 3-15
Figure 3-9 Internet Access Setup
The following table contains instructions on how to configure your Prestige for Internet access.
Table 3-5 Internet Access Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
ISP’s Name Enter the name of your Internet Service Provider. This
information is for identification purposes only.
MyISP
Encapsulation
Press [SPACE BAR] to select the method of encapsulation
used by your ISP. Choices are PPPoE, PPP, RFC 1483 or
ENET ENCAP.
RFC 1483
Multiplexing
Press [SPACE BAR] to select the method of multiplexing
used by your ISP. Choices are VC-based or LLC-based.
VC-based
VPI # Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
8
VCI # Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
35
ATM QoS Type
Press [SPACE BAR] and select CBR (Continuous Bit Rate) to
specify fixed (always-on) bandwidth. Select UBR (Unspecified
Bit Rate) for applications that are non-time sensitive, such as
e-mail.
UBR
Peak Cell Rate (PCR) This is the maximum rate at which the sender can send cells.
Type the PCR.
0
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= RFC 1483
Multiplexing= VC-based
VPI #= 8
VCI #= 35
ATM QoS Type= CBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel: