2 - 4 Ethernet RMON MultiProbe Module Installation and Operation Guide
Unpacking Procedures
To unpack the RMON MultiProbe Module:
1. Verify that the RMON MultiProbe Module (Model Number
RMON-EMP-3) is the model you ordered by checking the model
number listed on the side of the shipping carton.
Note that the product model number printed on the shipping box
differs from the model number on the product. The model number
on the shipping box contains the prefix ‘3C9’.
2. Remove the module, in its antistatic bag, from the shipping carton.
3. Remove the module from the antistatic shielding bag and inspect it
for damage.
Always handle the module by the faceplate, being careful not to
touch the components. If the module appears to be damaged, return
it to the anti-static shielding bag, repack it in the shipping carton, and
contact your local supplier.
Keep the shipping carton and anti-static shielding bag in which your
module was shipped so that you can repackage the module for storage or
shipment.
