A SERVICE OF

logo

Troubleshooting 4 - 5
Attached terminal
does not operate
The terminal is
malfunctioning.
Follow the
troubleshooting
procedures recommended
by the terminal
manufacturer.
Cables are
unattached.
Make sure that the cable
connections at both ends
are secure.
Cables are not the
correct type.
Make sure that the cable
attached to the terminal
conforms to the
specification as described
in Appendix A,
Specifications, the
section titled Connectors
and Cables.
The terminal is
configured
incorrectly.
Check the console port
configuration. Verify that
the terminal is
configured as 8-bit data,
no parity, 1 stop bit, and
9600 baud rate.
Table 4-2. Troubleshooting Malfunctions (Continued)
Symptom Possible Cause Corrective Action