A SERVICE OF

logo

Configuring the Module 3 - 3
Figure 3-1 is a flow chart of the RMON MultiProbe Module configuration
menus.
Figure 3-1. Configuration Menu Flow Chart
Main Menu
1 Modify/View configuration values
2 Download new firmware
3 Warm start and Exit
4 Cold start and Exit
Enter one of: 1 2 3 4 ?
Warm-start the module
and exit
menus
3
1 Filename to download
2 tftp server IP address
3 Download to firmware
4 Temporary download
0 Return to previous menu
2 Download Menu
1 Modify/View Configuration Values
1 Modify/View network settings
2 Autodiscovery echo interval (secs)
3 Date
4 Time
5 Timezone
6 Modify/View serial port settings
6 Modify/View Serial
1 Serial port IP address
2 Serial port subnet mask
3 Serial port speed
4 Serial port mode
5 Modem Init String
6 Modem Hangup String
7 Modem Connect Responses
0 Cancel changes and exit
S Save changes and exit
8 Modem No-Connect Responses
Configuration Values
S Save changes and exit
0 Cancel changes and exit
Modify/View network settings menu shown on next page
Cold-start the module
and exit menus
4