A SERVICE OF

logo

Service Calibrations
5-10
HP DesignJet 5000 and 5500 Series Printers Service Manual
7. The Printer then performs the Printhead to media spacing
calibration and displays the following message:
During this stage the Printer will print the following pattern.
8. On successfully completing the Calibration, the following message
is displayed:
9. Press Back to return to the Service Calibrations menu.
If the Calibration fails the following message is displayed. Press
Enter to continue.
NOTE Refer to page 5-26, Calibration Error Codes to troubleshoot
error codes.
NOTE After the Calibration has been performed, print the Service
Configuration print to be sure that it has correctly been stored in
the EEROM. For information on the Service Config Print
Page 1-37.
Printhead to media
spacing
Calibrating...
Please wait.
Calibrating line sensor.
2.1 Scan Axis Calib
Press BACK to return
Calibration performed
Top
Enter
Back
n
p
Press Back
to previous menu
correctly
2.1 Scan Axis Calib
Calibration Error
(xxxx)
Press ENTER to continue
Top
Enter
Back
n
p
Press Enter