System Error Codes
2-16
HP DesignJet 5000 and 5500 Series Printers Service Manual
System Error: 0B0001
Problem
Description:
Bad Humidity Read
Corrective Action: Try the following:
Replace the ISS PCA Page 8-91
Replace the Main PCA Page 8-81.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 0B0002
Problem
Description:
Bad IDS pressure read.
Corrective Action: Try the following:
Check that the cable from the Ink Supply Station (ISS) PCA to
the Ink Supply Station is correctly connected.
Check that the Air Pressurization System Sensor Cable is
correctly connected and is NOT damaged.
Check all the tubes of the APS and make sure they are NOT
pinched or damaged.
Faulty APS. Replace the APS Page 8-67.
If the error code continues, replace the Main PCA Page 8-81.
WARNING Only replace one component at a time and check if the error has
gone before replacing another component. Using this procedure
you will be able to determine exactly which component failed.
System Error: 0B0003
Problem
Description:
ADC0 Internal channels check Failure.
Corrective Action: Replace the Main PCA Page 8-81.
