A SERVICE OF

logo

Removal and Installation
8-39
HP DesignJet 5000 and 5500 Series Printers Service Manual
13. Carefully lift the Clips and the
Trailing Cable from the Printer.
Installation of Trailing Cable
WARNING Do not install damaged Trailing Cables. If the Trailing Cable is
incorrectly installed or it is damaged, a "Power Supply Error
#1" message will appear on the Front Panel during initialization.
WARNING When Installing the Trailing Cable, make sure you install it as
follows:
1. Install the Trailing Cable starting from
the Clip on the left as this will provide
a reference point for adjusting the
length of the Trailing Cable.
Check
edge
for
damage
locating pin
Left Clip