A SERVICE OF

logo

Removal and Installation
8-56
HP DesignJet 5000 and 5500 Series Printers Service Manual
4. Install the Carriage Cover.
NOTE Make sure the cover is
installed vertically, if not the
Cover Retaining Pins can be
broken.
5. Clip the Carriage Cover on both sides
of the Carriage Assembly by pushing
the clip downwards (with force if
necessary).
NOTE Make sure the clips are
locked correctly, if not the
Carriage Cover could
become loose and cause
major damage to the printer.
NOTE You must perform the
following Calibration when
the Line Sensor is replaced:
Scan Axis Calibration Page 5-7.
3XVKKHUH