A SERVICE OF

logo

Replacing Toner
Ordering and Replacing Consumables 4-5
Consumables
When the printer is in a toner low or toner empty condition, opening the upper right
cover displays the following text on the Control Panel:
Toner Replacement
Add new toner
and replace toner collector
then close right cover
3. Locate the toner kit.
4. Remove a toner bottle.
5. Open the toner fill flap (front flap), as shown in Figure 4-2.
Figure 4-2 Opening the Toner Fill Flap and shaking the Toner Bottle
6. Check the top of the toner bottle to make sure it is closed. Shake the contents of the toner
bottle to loosen any toner that has settled and packed during shipment.
7. Line up the guide pins on the bottle with the guide pin openings on the toner fill
opening. Insert and turn the toner bottle clockwise 180
°
to start filling, as shown in
Figure 4-3.
Toner fill flap