A SERVICE OF

logo

Clearing Paper Input Jams
3-32 Printer Tasks
Clearing HCI Jams
When the printer tries to obtain a sheet of paper from the HCI and the paper fails to load
properly, this is an HCI paper jam. This is indicated on the Control Panel by the blinking paper
path shown in Figure 3-43.
HCI jam 1(pick error), a jam where the paper did not leave the HCI correctly.
HCI jam 2 (jam), a jam where the paper did not enter the printer correctly.
HCI jam 3 (jam), a jam where the paper is between the printer and the HCI.
Figure 3-43 HCI paper path jam indication
Clearing HCI Jam 1
1. If the Control Panel indicates an HCI jam 1 (a pick error), open the HCI door as shown
in Figure 3-44. Press the button on top of the HCI to lower the paper stack.
Figure 3-44 Opening the HCI door
Offline
Offline
Menu End
600dpi
LTR
LTR
LTR
LTR
Offline
Blinking
HCI jam 2
Remove paper & Press Clear
PCL
Cen
LTR
LTR
LTR