Test Menu Settings
Control Panel 2-29
Control Panel
Report Name Report Contents
SETUPS
Report
• Printing Menu lists the current print job requirements.
• Configuration Menu lists the printer’s image processing requirements.
• PCL Menu lists font characteristics.
• Comms Menu lists printer interface communication requirements.
• Maintenance Menu lists printer alignment characteristics that affect images.
• PapSize Menu lists current paper sizes in each tray.
• Printer Information lists the printer’s buffer information for maintenance purposes.
• Drive A floppy diskette; (3.5 inch floppy drive) shows floppy status (installed/not
installed).
• Drive C (hard drive) lists the hard drive characteristics.
MAINT
• Engine Status lists maintenance information.
• Maintenance Counters list the consumables usage by based on drum revolutions
and duty cycle. The numbers are based on life expectancy of these consumables.
You are responsible for maintenance of these consumables on a schedule
presented in “Maintenance” on page 5-1.
• Event Log lists all printer-captured events (such as paper jams and errors) and
the time and date consumables are replaced.
FONTS
Typeface Report lists all available typefaces currently installed in the D640’s virtual
cartridges.
TABLE
Table provides images and programming codes for each available typeface.
MENUS
Menus provides all current menu settings.
TESTPRINT
Testprint provides a ripple test pattern.
filesA
filesA is the printer’s 3.5 inch floppy disk drive (FDD) A-drive for inputting information.
filesC
filesC is the printer’s C-drive (hard disk drive or HDD) list of directories and files.
