A SERVICE OF

logo

Adjusting Custom Tray Paper Guides
Printer Tasks 3-9
Printer Tasks
1. Adjust the guides to the size of your paper. Figure 3-12 shows the adjustment guide
travel directions.
Figure 3-12 Custom Paper Tray guide adjustments
2. Load the paper in the tray as described in “Loading Paper Into Trays and HCI” on
page 3-16.
3. Do not stack the paper above the "paper full" mark, as this may cause paper jams or
skewed print.
Note Never mix the types of paper loaded in a tray. Intermixing paper can result in paper
handling problems.
4. Adjust the guides to fit closely, but not too tightly. A tight fit binds the paper and can
cause misfeeds.
Squeeze lever to release
front and rear guides
Thumbscrews to adjust
left guide (finger tighten)