A SERVICE OF

logo

Open as PDF
next previous
Printer Pick Roller Kit - Replacing the Tray Pick Rollers
Ordering and Replacing Consumables 4-39
Consumables
3. Snap the blue plastic clip into place. It fits over a groove on the end of the shaft to secure
the lower rollers. See Figure 4-49. If you don’t see this groove, the rollers may not be
completely seated all the way onto the shaft.
Figure 4-49 Blue Clip snapped into place
Installing the Printer Upper Pick Rollers
When you install the printer’s upper pick rollers, the slot on the pick roller assembly must mate
with the corresponding mounting tooth on the printer bracket. See Figure 4-50.
Figure 4-50 Upper Pick Roller Assembly Slot and Mounting Tooth on printer
Blue clip placed on lower
roller shaft
Blue clip snapped into place on
lower roller shaft groove
Slot
Metal tooth