COOLING SYSTEM 4-19
Coolant Temperature Warning Light Switch
Coolant Temperature Warning Light Switch Removal
CAUTION
The coolant temperature warning light switch
should never be allowed t o fall on a hard surface.
Such a shock to the part can damage it.
•
Drain the coolant (see Coolant Change in Periodic Main-
tenance chapter).
•
Disconnect the switch lead connector [A].
•
Remove the switch [B].
Coolant Temperature Warning Light Switch Installation
•
Apply silicone sealant to the threads of the switch and
tighten it.
Sealant - Kawasaki Bond (Silicone Sealant): 56019-120
Torque - Coolant Temperature Warning Light Switch: 6 .9
N·m (0.70 kgf·m, 61 in·lb)
•
Fill the coolant (see Coolant Change in Periodic Mainte-
nance chapter).
Coolant Temperature Warning Light Switch Inspection
•
Refer to the Electrical System chapter.
