FINAL DRIVE 12-19
Output Bevel Gears
•
Hold the housing assembly [A] with the holder [B] in a
vise.
Special Tool - Holder & Guide Arbor: 57001-1476
•
Remove:
Bearing Holder [C]
Special Tool - Socket Wrench, Hex 50 [D]: 57001-1478
○
If the holder seems too difficult to break free, apply heat
to softer the locking agent.
•
Remove:
Ball Bearing
Special Tool - Oil Seal & Bearing Remover: 57001-1058
•
Remove the output driven bevel gear [A] from the output
shaft [B] using the bearing puller [C] and spacer [D].
Special Tools - Bearing Puller: 57001-135
Output Shaft Holder & Spacer, m1.25: 57001
-1479
Output Driven Bevel Gear Assembly
•
Press the new ball bearing until it is bottomed.
Special Tool - Bearing Driver Set [A]: 57001-1129
•
Hold the housing assembly [A] with the holder [B] in a
vise.
Special Tool - Holder & Guide Arbor: 57001-1476
