A SERVICE OF

logo

17-26 ELECTRICAL SYSTEM
Charging System
Alternator Cover Removal
Drain:
Coolant (see Cooling System chapter)
Oil (see Periodic Maintenance chapter)
Remove:
Recoil Starter (see Recoil Starter chapter)
Water Pump Impeller (see Cooling System chapter)
Torque Converter Cover (see Converter System chap-
ter)
Remove the three bolts of the drive pulley cover [A].
Install the drive pulley holder [B], tightening the remove
three bolts [C].
Special Tool - Drive Pulley Holder: 57001-1520
Holding the drive pulley with the drive pulley holder,
loosen the alternator rotor bolt [A].
Remove:
Alternator Rotor Bolt
Pulley [B]
Remove:
Collar [A]
Install the M6 bolts [B] to the collar, and remove it.
Remove:
Alternator and Crankshaft Sensor Lead Connectors (dis-
connect)
Alternator Cover Bolts [A]
Alternator Cover [B]